Coil Tubing System

Coil Tubing System

The IES Coil Header System is designed to shield and protect the coil tubing or e-line during frac pumping operations. The main Coil Buffalo Head is equipped with a durable deflector sleeve that shields the coil tubing from the pumping slurry. In addition the Buffalo Head may also be screened to prevent undesirable debris from being pumped downhole which could compromise the stage and/or the downhole mechanism of the packer equipment.

Features
Low Profile-AssesableMain unit 38.1cm (15 in) high, overall wellhead structure at a reasonable height.
Protects and Shield Coil Frac jobs can be pumped down annulus with Coil tubing or E-line left in the well
Works Efficiently For High Rates  Furnished with two or four frac entries, 3 M3/min is the max rate per port for a combined max rate for unit is 12 M3/min
Parallel Fluid Entry DesignCoil block and deflector shield  are angled in parallel wich significantly reduces fluid disturbances and erosion
Deflector Has Large Bore Deflector’s bore is adequate to pass large down hole tools
Quick Deflector RemovalDeflector can be quickly removed and the unit coverted to a straight Buffalo Head for normal pumping
 Universal SizesAvailable for 114mm, 127mm, 139mm and 177mm, 10K or 15K applications 
Optional 
Flow Back Though Main BlockFlow Back to testers at main block no spool or flow back block needed, shorten stack by 29″ overall
High Impact Protective CoatingScreen coated with a special tungsten coating.  Has proven to be extremely resilient to sand ladden fluids.
Screen Fluid Entry DesignScreens defect fluid to side bore while catching debris protecting tubing from wear and tool down hole from contaminants
Full 7 1/16″ BoreMain bore is 7 1/16″ with 70″ sq mixing chamber adequate to pass large down hole